Are you ready for the summer! Make sure your baler is ready for warmer days with a few preventative maintenance steps:

1. Make sure the cooler is free of blockage and is blown out at the end of each shift.
2. Take an oil sample to make sure the oil is efficient.
3. Change oil filters and clean out the air filters.
4. Make sure the oil level is in the sight glass.
5. Inspect and repair any leaks.
6. Make sure the baler's temperature is between 120 and 140 for the most efficient system.
7. Check the knife gap; it should be 1/32 for the most efficient cut.
8. Make sure the knives have a sharp edge on them.
9. Check all wear liners for wear.

By performing just a few preventative maintenance checks now, you can help ensure that your equipment will beat the heat this summer.