About HSC

Company photo - HSC employees and fleet in front of office building

Recycling Equipment Service Specialists

HSC technician crew at job site

Welcome to Himes Service Company Inc. (HSC), your trusted partner in the recycling and scrap industry for over 25 years. Our dedicated team of expert technicians is equipped to handle emergency, preventative, and scheduled maintenance on a wide range of equipment, including balers, shears, densifiers, conveyors, sort systems, compactors, briquetters, and wire tiers.

Situated on a spacious five-acre facility in Waco, Texas, we boast a robust machine shop capable of repairing, rebuilding, and customizing equipment from the ground up. Our dedicated onsite crews also offer turn-key installations, equipment relocations, baler and shear relines, equipment rebuilds, computer upgrades, wire tier replacements, substructure repairs, belt replacements/repairs, system training, and more.

HSC yard with recycling equipment and fork lift moving steel plate

Situated on a spacious five-acre facility in Waco, Texas, we boast a robust machine shop capable of repairing, rebuilding, and customizing equipment from the ground up. Our dedicated onsite crews also offer turn-key installations, equipment relocations, baler and shear relines, equipment rebuilds, computer upgrades, wire tier replacements, substructure repairs, belt replacements/repairs, system training, and more.

HSC technician welding pit cover on in-ground conveyor installation

At Himes Service Company Inc. (HSC), no challenge is too daunting for our experienced team. As your trusted advisor and partner, we leverage decades of industry expertise to provide strategic guidance and valuable insights tailored to your recycling and scrap facility. Whether it's identifying cost-saving opportunities, implementing efficiency improvements, or ensuring regulatory compliance, HSC is dedicated to supporting your success every step of the way. Reach out to us today and let's navigate your operational challenges together!

The HSC Mission

At our core, we embody the values of servant leadership, continuous learning, adaptability, transparency, and accountability. Our unwavering commitment to theese principles guides our actions and decisions every step of the way. With a relentless pursuit of excellence, we prioritize delivering top-quality solutions and services to our valued customers. Our mission is driven by a culture that embraces openness, fosters growth, and upholds the highest standards of integrity. Together, we strive to make a positive impact, surpass expectations, and create lasting partnerships built on trust and reliability.

HSC mission - Servant leaders, open to ideas and changes, always honest, accountable, provide quality

Our Leadership

Photo of Roy Daily

Roy Daily

Owner, CEO

[email protected] Read Bio
Photo of Jennifer Daily

Jennifer Daily

Owner, President

[email protected] Read Bio

Carlos Fabela

General Manager

[email protected] Read Bio
Photo of Paul Whitman

Paul Whitman

Service Manager

[email protected] Read Bio
Photo of Taylor Semulis

Taylor Šemulis

Vice President

[email protected] Read Bio

Our Work

Image of a MRF/sort line relocation
Image of a MRF/sort line relocation
Image of a MRF/sort line relocation

Work of beauty there! Reuse is part of the recycling mantra! Here at HSC we are proud to be doing just that for clients in the Recycling industry!

We can relocate and install your equipment - whether it's shears, shred lines, balers, conveyors, compactors, or entire MRFs.

With over twenty-five years of experience providing relocation and installation services to the recycling, scrap, and waste management industries, Himes Service Company has the expertise to safely and efficiently remove, relocate, and install your equipment, working closely with your project managers to meet budgetary targets.

Image of a MRF updated by HSC
HSC technician crew on MRF retrofit job
Image of a MRF updated by HSC

When updating a Material Recovery Facility (MRF), HSC's expert crew undertakes a range of tasks to enhance efficiency and productivity. This includes installing state-of-the-art sorting and processing equipment, retrofitting existing systems, optimizing conveyor layouts, performing electrical and hydraulic upgrades, and implementing advanced control systems.

Our team also provides thorough training to ensure smooth operation and maintenance, ensuring that the facility operates at peak performance while utilizing safe practices and meeting industry standards and regulatory requirements.

Image of a MRF updated by HSC
Harris two-ram baler being moved off a truck by crane during install
Harris two-ram baler being moved by crane into a building for installation
Infeed conveyor moving paper after conveyor and baler installation

Installation of a Harris Centurion Two-Ram Baler and Fluent Conveyor

Newly installed Harris Centurion two-ram baler and Fluent conveyor making paper bales
Harris Centurion 150HP two-ram baler before rebuild

<   Before

After     >

Harris Centurion 200HP two-ram baler after rebuild

We rebuilt an aging but capable Centurion 150 two-ram baler and turned it into a powerful, efficient T200 with a new Accent wire tier! Rebuilds are comprehensive projects that involve assessing each component for wear and damage, replacing necessary parts, thoroughly inspecting the structure for signs of stress or damage, and evaluating (and possibly upgrading) the hydraulic system, motors, structure, and controls. Rebuilding an older baler can increase efficiency, safety, and performance and can considerably extend the production life of the machine!

Harris Centurion 150HP two-ram baler before rebuild
Harris Centurion 200HP two-ram baler after rebuild
Harris Centurion 200HP two-ram baler hydraulic power unit after rebuild

Custom Hopper and Tail End Flare on Steel Belt Conveyor

HSC custom hopper and tail flare on steel-belt conveyor
HSC custom hopper and tail flare on steel-belt conveyor
HSC custom hopper and tail flare on steel-belt conveyor
HSC custom hopper and tail flare on steel-belt conveyor
HSC custom hopper and tail flare on steel-belt conveyor
Mobile shredder installation
Mobile shredder installation
Mobile shredder installation

Setting up a mobile shredder in Alaska

stationary shear being installed
stationary shear being installed
stationary shear being installed

No job is too daunting for our specialized install crew, nor are we limited to any manufacturer. Ask us about installing Harris, Copex / LeFort, Bonfiglio, Metso / Lindemann, Taurus, and more!

stationary shear being installed
stationary shear being installed

We replaced an old, inefficient baler with this new Harris Badger

Installation of a new Harris Badger two-ram baler
Installation of a new Harris Badger two-ram baler
Installation of a new Harris Badger two-ram baler
Installation of a new Harris Badger two-ram baler
Installation of a new Harris Badger two-ram baler

E-scrap system installation

e-scrap recycling facility new installation
e-scrap recycling facility new installation
e-scrap recycling facility new installation
e-scrap recycling facility ew installation
e-scrap recycling facility new installation

Our skilled technicians perform essential preventative maintenance on a large Single Ram Auto Tie at a Paper Recycling facility, helping to maintain its capacity to push out over 25 tons per hour of mixed fiber material with peak efficiency.

HSC technician placing sticker after preventative maintenance on a single-ram auto-tie baler
HSC technician performing preventative maintenance on a single-ram open-end auto-tie baler
HSC technician performing preventative maintenance on a single-ram open-end auto-tie baler at a paper recycling facility
HSC technician performing preventative maintenance on a single-ram open-end auto-tie baler
HSC technician performing preventative maintenance on a single-ram open-end auto-tie baler

HSC took conveyor innovation to new lengths with a high-quality extension that’s a cut above the rest—literally making the conveyor run longer than ever before!

conveyor extension after custom fabrication
conveyor extension after custom fabrication
conveyor extension after custom fabrication
conveyor extension after custom fabrication
conveyor extension after custom fabrication
HSC technician crew at job site Moving a two-ram baler by crane into a building for installation

With a 25-year legacy in the industry, Himes Service Company specializes in providing exceptional service for most makes and models of recycling machinery. We are dedicated to delivering reliable and efficient service, ensuring that your equipment operates at its best!

Whether it's routine maintenance, repairs, or troubleshooting, our experienced team is committed to maximizing the performance and lifespan of your recycling equipment and reducing downtime! Trust us for comprehensive service and expertise honed over decades of experience.

HSC in our Community

Hot Dog!

An employee stands ready to give out free hot dogs during a food drive in the HSC parking lot

HSC is dedicated to feeding the hungry! We have supported multiple food drives for Shepherd's Heart Robinson Food Pantry, ensuring that those who donate food leave with a full heart and a full stomach.

We Hire Vets

HSC is recognized for being a veteran-friendly employer

HSC was recently recognized for being a veteran-friendly employer. We gratefully employ and honor those who have served in the US armed services.

Gulf Coast ReMA

GiGi Gebhardt as membership chair and member of the Gulf Coast Region ReMA (Recycled Materials Association, previously ISRI) board of directors

As longtime ReMA (previously ISRI) members, we are proud of our own GiGi Gebhardt, who gives back by serving as membership chair and as a member of the Gulf Coast Region ReMA board of directors.

Toys for Tots

HSC staff at the news station after bringing trucks full of toys collected for Toys for Tots

It's a long-standing tradition at HSC to "fill the truck" with toys at Christmas and deliver them to Toys for Tots. We love bringing joy to kiddos at Christmastime!

Our History

25 years and still growing - three generations of family at HSC - from Recycling Today
20 years of commitment to our customers - from Recycling Today

At Himes Service Company (HSC), we're not just a recycling equipment and service provider; we're your dedicated partners in sustainability. As a second-generation, woman-owned business with over 25 years of experience, we've been at the forefront of the recycling, solid waste, and scrap industries in Texas and across North America. Our journey began with Buddy Himes, a recycling equipment specialist who answered the call for continued service after a national brand acquisition, and today, we're proud to carry forward his legacy with the vision of Jennifer and Roy Daily.

At HSC, our mission is clear: to provide top-notch equipment sales, rentals, parts, and experienced service technicians to support all your recycling and scrap equipment needs. We're passionate about finding innovative solutions to address environmental challenges, and we're actively involved in organizations like STAR (State of Texas Alliance for Recycling) and ReMA (Recycled Materials Association, formerly ISRI) to drive positive change in the recycling landscape. When you partner with HSC, you're not just getting a service; you're joining a community dedicated to a sustainable circular economy. Let's work together to make a greener future a reality.

Jobs at HSC

HSC technicians on the job site beside a header that says We are Hiring

Himes Service Company is a 25-year-old family-run business based in Waco, Texas with clients from Alaska to Puerto Rico. We are helping to save the planet with the equipment needed to process and move recycled material – paper, cardboard, plastic, and metals!

We offer a competitive, tiered pay plan based on experience, performance, and training. Medical, dental, employer-contributed 401k, and other benefits available within 30 days.

Himes Service Company is an Equal Opportunity Employer and provides equal employment opportunity to all qualified individuals regardless of race, color, religion, sex, age, national origin, citizenship, veteran status, disability, sexual orientation, gender identity, genetic information or any other factor protected by applicable federal, state, or local law.

HSC technicians relocating a two-ram baler

They Say

Proud Member of STAR and ReMA

Recycled Materials Association (ReMA) Gulf Coast Region Logo State of Texas Alliance for Recycling (STAR) Logo

BBB Accredited

Himes Service Company, LLC BBB Business Review
Copyright (c) 2023 Himes Service Company, Inc.